Backup power source for critical facilities where power outages are not permitted, including telecommunications facilities, power receiving and distribution equipment for transportation systems, emergency lighting systems in buildings, and water treatment facilities.

Main Applications

• Emergency lighting systems
• Power receiving and distribution facilities, etc.

Features

Lightweight and compact compared with lead-acid batteries

• Achieves a 30% reduction in floor space and 55% reduction in weight compared with Energywith lead-acid battery systems. ^※1

Reduced installation footprint through front-access maintenance

• The battery panel allows access to maintenance components from the front, eliminating the need for rear maintenance space and reducing overall rear space.

Easy replacement of lithium-ion batteries

• Battery packs are mounted in a 19-inch rack, making replacement easy and enabling rapid response to unexpected troubles.

Monitoring of individual cell voltages

• Each cell voltage is monitored, enabling detection of abnormalities.

Dropper-less configuration available according to customer requirements

※1 Example of DC power supply system design.

Specifications

Item			Specification
System configuration	Rectification method		Single-phase full-wave (hybrid bridge method), Three-phase full-wave (pure bridge method)
	Cooling method		Natural cooling or forced air cooling
	Rated operation		Continuous
AC Input	Number of phases		Single-phase 2-wire or three-phase 3-wire
	Voltage		Single-phase: 100, 105, 110, 200, 210, 220 V Three-phase: 200, 210, 220, 400, 415, 420, 440 V
	Voltage fluctuation range		±10%
	Rated frequency		50 or 60 Hz
	Input power factor		Single-phase: 60% or higher, Three-phase: 70% or higher
DC Output	Charging method		Float charging method
	Rated voltage		100 V system
	Voltage adjustment range		±3% or more of rated voltage
	Voltage variation range		Within ±2%
	Output current	Single-phase input	10､15､20､30､40A
		Three-phase input	10､20､30､40､50､75､100､150A
	Current fluctuation range		0~100%
	Maximum current droop		120% or less of rated current
General Conditions	Ambient temperature		0~40℃
	Relative humidity		25–85% (non-condensing)
	Installation location		Indoor locations at altitudes of 1,000 m or less, with minimal presence of harmful gases, salt, and dust

Note: Please use the equipment under the environmental conditions specified in the specifications. Failure to do so may shorten service life due to equipment malfunction or component deterioration.

Applicable Standards

• JIS C 8715-2 (applicable to lithium-ion batteries)
• Certified battery equipment (Fire Service certification obtained)
• For battery equipment with a capacity of 4,800 Ah per cell or greater subject to the Fire Prevention Ordinance, compliant cubicles will be used.

DC Power Supply Systems: Applications and Series